Power Steering
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Power Steering



Yes, the flow restrictor is incorporated in the size reduction fitting.  On
the ones I took apart, the restrictive orifice was 0.070" diameter, but this
was not for your model car, so I don't know that it would be the correct
size for your car.  However, you could start with that and see if it cures
the noise without unduly slowing the assist function, then fine tune it from
there.

Dick Benjamin
----- Original Message ----- 
From: <alacaria@xxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Wednesday, November 19, 2003 4:02 AM
Subject: Re: IML: Power Steering


> Dick concerning the flow restriction orifice. On the original hose there
is
> half of it that is larger that goes towards the pump and the other half is
> smaller that goes towards the steering itself. Is that what is called the
> restriction oriface?
>
> At 08:12 PM 11/18/03 -0800, you wrote:
> >I hope you studied the archives on this subject - most of the replacement
> >pressure hoses omit the flow restriction orifice that is there to prevent
> >noise from the pump, because the people making the hoses are not
engineers
> >and think it is there simply as a size reduction fitting.
> >
> >If you have a replacement pressure hose that does not include this
device,
> >you will not be able to get rid of the noise without removing the belt
from
> >the pulley!
> >
> >You need to obtain a correct original power steering pressure hose, even
if
> >it is no good, so you can retrieve the flow restriction orifice and have
it
> >used in making a correct new hose.
> >
> >Dick Benjamin
> >----- Original Message -----
> >From: <alacaria@xxxxxxxxx>
> >To: <mailing-list@xxxxxxxxxxxxxxxx>
> >Sent: Tuesday, November 18, 2003 1:38 PM
> >Subject: IML: Power Steering
> >
> >
> > > Hi Everyone;
> > >
> > > I am the one that had the whiny power steering unit on my 56 Imperial.
I
> > > did purchase one off a fellow Imp owner and put it on and still had
whine.
> > > I then put new hoses on, high pressure and return. I also purchased
the
> > > rubber piece that goes between the generator and the power steering
unit
> > > and put it on. I also flushed out the power steering fluid and put in
> > > transmission fluid and it still whines when I turn.
> > >
> > > The only thing I could think is, that I put on another worn unit, or
my
> > > first unit was good and I introduced a second unit that was worn.
> > >
> > > Does anyone have anymore ideas?
> > >
> > > Anthony Lacaria
> > >
> > > 56 Imperial
> > > 90 Imperial
> > > 72 Javelin
> > > Looking for a 61 Imperial
> > >
> > >
> > >
> > >
> > > -----------------  http://www.imperialclub.com  -----------------
> > > This message was sent to you by the Imperial Mailing List. Please
> > > reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> > > shared with everyone. Private messages (and attachments) for the
> > > Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> > > To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
> > >
> > >
> >
> >
> >


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.