Temp sending unit for '68

[Mark McDonald <tomswift@xxxxxxxxxxxxx>]

D2,

Thanks for your help.  Well, my gauge always used to read right in the middle
of the gauge, just inside the little boxed area-- until recently.  Also, I
looked in the FSM and it says the needle should be in the middle.  And, my
other Imperials all stay in the middle or a little to the left of center  . . .

So something's funny here . . . but thanks again.

Mark

dardal@xxxxxxxxxxxxxxx wrote:

> Mark, that's normal.  They all say below the little rectangular bar, (except
> for my LeBaron's that goes all over the place).  Apparently, there was a
> perception back then that the engine running cold is "good".  And Chrysler
> designed the gages so they show "cold" all the time.
>
> You may want to install a mechanical gage if you want to know what the
> temperature really is.
>
> D^2
>