Choke pull off for 66 part #

["Matt Hopkins" <mhoppy@xxxxxxxxxxx>]

My local dealer said the part # is 2264580. Any help appreciated  

-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]On Behalf Of Jim Carpenter
Sent: Monday, March 17, 2003 10:17 AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: Choke pull off for 66


Let us know if you have trouble getting one and we can do our best to 
help.  The original Chrysler part number would be helpful.
Jim

Chris Hawkins wrote:

>Carb# for a '66 Imperial is Carter AFB 4131-S.  My
>experience is that the correct pull-off is not easily
>located, but who knows, you might get lucky.  
>
>If not, the same one was used on 413's and 440's from
>the mid-60's, so good used ones should be possible to
>find.
>
>Chris H.
>
>60 NY T&C
>66 Crown Convertible
>66 Lebaron
>
>
>--- Elijah Scott <imperial1971@xxxxxxxxx> wrote:
>  
>
>>--- Matt Hopkins <mhoppy@xxxxxxxxxxx> wrote:
>>    
>>
>>>I took my 66 to my mechanic because carbs are not
>>>      
>>>
>>in
>>    
>>
>>>my book of knowledge.
>>>He said the choke pull off is misssing.  
>>>      
>>>
>>Matt,
>>
>>A good option is to note the model number of your
>>carb
>>('m guessing it's a Carter AFB, but you'll need the
>>actual number that's stamped on it) and take that to
>>a
>>NAPA store.  They should be able to locate the
>>correct
>>pull-off.  The last time I bought one it was about
>>$15, so it's not terribly painful.  And there are
>>only
>>two screws to replace it.
>>
>>Good luck!
>>
>>Elijah
>>PS--Thanks for the AutoTemp tip
>>1965 Imperial LeBaron
>>1970 Imperial LeBaron
>>(3) 1971 Imperial LeBarons
>>
>>__________________________________________________
>>Do you Yahoo!?
>>Yahoo! Web Hosting - establish your business online
>>http://webhosting.yahoo.com
>>
>>