Apologies Re: IML: patch panels

["Kerry Pinkerton" <pinkertonk@xxxxxxxxx>]

Sorry guys, I was not paying attention and sent this to the entire list.  I'll try and watch it.

 

KerryP
Patch panels fabricated
Imperials -- 50 Limo, 57 roadster, 61's, 64, 68 Convert, 73, a 66 300 and a bunch of lesser marques

----- Original Message -----

From: Kerry Pinkerton

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Saturday, January 25, 2003 3:15 PM

Subject: Re: IML: patch panels

Hi Mike, it depends on how much you need.  Just the inner panel exclusive of the flanges and fender lip would be around 50 or so.  The whole thing including fender lips down to the flange that welds into the inner panel is considerably more difficult and therefore more expensive.

 

If you can communicate exactly what your problem areas are I can give you some advice as to how to proceed as well as a better estimate of the cost.

 

KerryP
Patch panels fabricated
Imperials -- 50 Limo, 57 roadster, 61's, 64, 68 Convert, 73, a 66 300 and a bunch of lesser marques

----- Original Message -----

From: Mike and Cindy

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Saturday, January 25, 2003 2:08 PM

Subject: IML: patch panels

Kerry,  how much would you charge to fabricate patch panels for the lower rear qtr panels on my 67 Imp convert ?, thanks, Mike Becker