Fuselage Transmission Mount tip
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fuselage Transmission Mount tip



I recently discovered my transmission mount on my 72 Lebaron was torn to shreds, the vibration in the driveline was a dead giveaway,  Having already used a polyurethane insert on one of my "lesser" Chrysler products, I decided to give this a try on my Lebaron, since the mount on my Imp looks exactly like the one in my Charger, I figured there was a good chance it would fit, I was right, it fit like it was made for it, vibration is GONE! It's an easy fix, and cheap at $14.95  here's the link: http://store.yahoo.com/chucker54/tranmoun1.html 
 
It's part number  ENE5-1101G  listed for 71 and up a,b,e bodies, but it fits the IMPERIALS !
 
You have to re-use the metal shell of your original mount and press in the two halves of the new one, then slide the steel tube through both halves, despite what the instructions say, the best way to remove the old rubber is to set it on fire with a propane torch and toss it out in the driveway, it will burn for almost an hour, when it goes out, a little wire brushing is all that is needed to clean it up ( I used a small wire brush in my die grinder) then both halves and the tube press in by hand-really a slick little item. I hope this helps someone else who has this problem and if this info has already been posted this to the IML, please ignore this post.
 
Chris,
 
72 Lebaron, now minus the annoying vibration


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.