|
The hose should go from the water pump to the control valve
& out the other side of the control valve to the heater. That other
item sounds like an add on.
John
----- Original Message -----
Sent: Monday, August 12, 2002 5:16
PM
Subject: IML: 63 heater
I need some help figuring out how the heater is supposed to be
plumbed in
the 63. Evidently the control valve failed and the heater
is now
directly connected, making for very uncomfortable summer
driving. I am
going to get the control valve rebuilt/replaced, but
there is another
vacuum actuated valve mounted on the passenger fender
that I don't see in
the FSM. Is this supposed to be there? It
looks like the hose may have
connected through this valve before it went
to the control valve on the
fire
wall.
John
----------------- http://www.imperialclub.com
-----------------
This message was sent to you by the Imperial Mailing
List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx
and your response will be
shared with everyone. Private messages (and
attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To
UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
|
Back to the Home of the Forward Look Network