--- Imperial59crown@xxxxxxx wrote: > I am about to start working on the flightsweep deck lid, > removing the center > hub and trim ring to repair any rust which I am sure is > there. My question > is, does anyone out there have any ideas on how to seal > this area to prevent > water intrusion between the hub, and the trunk lid? I > thought about laying > down a bead of silicone, If done sparingly, clear silicone can be trimmed with a razor once dry. one could use a very fine x-acto knife and trim any excess that overflows. I would also use it on the washer-faces of the nuts that hold the trim on so that water does not go through the trim-mounting holes. The factory used a putty-like substance.... ===== Kenyon Wills 6o LeBaron - America's Most Carefully Built Car 73 LeBaron - Long Low & Luxurious __________________________________________________ Do You Yahoo!? Yahoo! Health - Feel better, live better http://health.yahoo.com