Robert what shape is you lower control arm bushing and is the lower control arm securely mounted...please check these! Thad the ImpPoster --- Robert Hanekamp <bobsmopar@xxxxxxxxxxxxxx> wrote: > Hi. > It is bowing side ways and I do have 2 extra bars. > It did this before I drove the car. > Thank you for your help. > Bob > ----- Original Message ----- > From: "D. Dardalis" <dardal@xxxxxxxxxxxxxxx> > To: <mailing-list@xxxxxxxxxxxxxxxx> > Sent: Saturday, June 29, 2002 9:02 PM > Subject: Re: IML: bent torsion bar > > > > Is it bowed upwards? Did it happen by running > over a rock or something on > > ground? How much is it deflected by? 1 inch, 6 > inches? > > > > Its probably a good idea to find a replacement > (won't be easy). Question > > is, should you drive the car till you find one? > How long has it been like > > that? > > > > D^2 > > > > At 09:21 PM 6/29/2002 -0500, you wrote: > > >Hi all. > > >I need to ask a question about the torsion bars. > > >On my 68 Imperial the right one is straight and > the left one has a bow in > > >it. > > >Should I take it out and put in a another one. > > >Thank you for any help on this. > > >Bob > > > > > > > > > > > >----------------- http://www.imperialclub.com > ----------------- > > >This message was sent to you by the Imperial > Mailing List. Please > > >reply to mailing-list@xxxxxxxxxxxxxxxx and your > response will be > > >shared with everyone. Private messages (and > attachments) for the > > >Administrators should be sent to > webmaster@xxxxxxxxxxxxxxxx > > >To UN-SUBSCRIBE, go to > http://imperialclub.com/unsubscribe.htm > > > > > > > >