Rustproofing on boxcars (Was: '67 or '68 promo model)?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Rustproofing on boxcars (Was: '67 or '68 promo model)?



You're right, I haven't taken a flashlight and a dentist's mirror to inspect
the inside of the inner panel of the door sheetmetal.  I'm obsessive, but
not quite that bad yet!  I did notice that the "undercoat" (actually body
schutz), is covered with white overspray on my white car inside the doors,
so they must have sprayed around quite a bit inside the car when painting
them.

Dick Benjamin
----- Original Message -----
From: <ViaJoaquin@xxxxxxx>
> You haven't looked deep enough into the crannies Dick! You need to look up
inside the doors, while the
> inside of the skin is undercoated in the lower areas to some extent, the
> upper areas and back side of the inner panel is left bare for the most
part,
> Roy
> 67 Crown FDHT





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.