 
| Hi Marc , both pieces do fit the same 
fender. The ant is in the same place as is the mirror, all you need to do is 
make a template from kitchen paper. Cut it out turn it over & you then mark 
it out etc. Did this on my Le Baron last year, due to driveing on the L.H. side 
of the road . You will need to duplicate the hole in the R.H bottom corner of 
the dash too to locate the control Knob. ( dont forget to put masking tape on 
the fender to mark it out on ,makes it alot easier to see what you are 
doing.) Regards Dave 60 Le Baron . 
 | 
 Back to the Home of the Forward Look Network
 Back to the Home of the Forward Look Network