Does anyone out there have a source for motormounts
for a '62 Imperial? Scott
--- List Server <mailing-list-owner@xxxxxxxxxxxxxxxx>
wrote:
> This is the digest version of the Imperial Mailing
> List. To receive messages individually, send an
> email to majordomo@xxxxxxxxxxxxxxxx with the
> following in the body of your message:
>
> set mode standard mailing-list
>
> To unsubscribe entirely, visit:
> http://imperialclub.com/IML-Specific/unsubscribe.htm
>
> If you have been switched to digest mode without
> your consent and you want to know why, visit:
> http://imperialclub.com/IML-Specific/autodigest.htm
>
>
> |
> |
> |
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ~~~~IML DIGEST~~~~~~~~~~~~~~MESSAGE
> SEPARATOR~~~~~~~~~~~~
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> |
> |
> |
>
> Date: Tue, 19 Mar 2002 21:08:10 -0500
> Subject: IML: exhaust manifold
> From: bandmgrinding@xxxxxxxx
> Reply-To: mailing-list@xxxxxxxxxxxxxxxx
> Hi Joe,
> I don't know where you are located but if you
> want to weld the
> manifolds and can get them to Springfield, New
> Jersey I can weld them up
> for you and probably hide the welds pretty well.
> Let me know if you need this done.
>
> Allan R
> 62 conv in process
> |
> |
> |
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ~~~~IML DIGEST~~~~~~~~~~~~~~MESSAGE
> SEPARATOR~~~~~~~~~~~~
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> |
> |
> |
>
> From: Merc1Doc@xxxxxxx
> Date: Tue, 19 Mar 2002 21:26:07 EST
> Subject: Re: IML: re: exhaust manifold
> Reply-To: mailing-list@xxxxxxxxxxxxxxxx
>
> --part1_fe.154e577d.29c94d3f_boundary
> Content-Type: text/plain; charset="US-ASCII"
> Content-Transfer-Encoding: 7bit
>
> D 2 I'm having my exhaust welded on my 56 and then
> powercoated I should
> have them back soon and will give you an update when
> I get them . Asa
>
> --part1_fe.154e577d.29c94d3f_boundary
> Content-Type: text/html; charset="US-ASCII"
> Content-Transfer-Encoding: 7bit
>
> <HTML><FONT FACE=arial,helvetica><FONT SIZE=2>D 2
> I'm having my exhaust welded on my 56
> and then powercoated I should have them back soon
> and will give you an update when I get them .
> Asa</FONT></HTML>
>
> --part1_fe.154e577d.29c94d3f_boundary--
> |
> |
> |
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ~~~~IML DIGEST~~~~~~~~~~~~~~MESSAGE
> SEPARATOR~~~~~~~~~~~~
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> |
> |
> |
>
> From: "Imperial 59" <imperial59@xxxxxxxxxxxxxx>
> Subject: Re: IML: '60 Motor Mounts
> Date: Tue, 19 Mar 2002 21:30:05 -0500
> Reply-To: mailing-list@xxxxxxxxxxxxxxxx
> Would these motor mounts be the same as a '59? If
> so I have a set that you
> can use while you have yours redone.
>
> Steve B.
>
>
> |
> |
> |
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ~~~~IML DIGEST~~~~~~~~~~~~~~MESSAGE
> SEPARATOR~~~~~~~~~~~~
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> |
> |
> |
>
> From: "Kevin Pacheco" <kevin50187@xxxxxxxxxxx>
> Subject: IML: compression test
> Date: Tue, 19 Mar 2002 20:00:48 -0700
> Reply-To: mailing-list@xxxxxxxxxxxxxxxx
> I have the compression gauge, but then realized that
> getting to the plugs
> was another story, I was thinking of taking the
> front wheel off, then
> taking the whole underpart above the wheel off, to
> get a straight shot at
> the plugs. Is there anyother easy ways to do this?
> When i get to the plugs, what would be a good
> reading at a 7,000+ altitude?
> Kevin Pacheco
> 71 Imperial
>
>
>
_________________________________________________________________
> Get your FREE download of MSN Explorer at
> http://explorer.msn.com/intl.asp.
>
> |
> |
> |
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ~~~~IML DIGEST~~~~~~~~~~~~~~MESSAGE
> SEPARATOR~~~~~~~~~~~~
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> |
> |
> |
>
> From: fergus857@xxxxxxx
> Date: Tue, 19 Mar 2002 22:08:07 EST
> Subject: IML: '52 Imperial For Sale
> Reply-To: mailing-list@xxxxxxxxxxxxxxxx
> Must sell my beautiful '52 4dr sedan. Car in
> beautiful condition. Located
> Indianapolis. For info e-mail me at :
> fergus857@xxxxxxx
> |
> |
> |
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ~~~~IML DIGEST~~~~~~~~~~~~~~MESSAGE
> SEPARATOR~~~~~~~~~~~~
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> |
> |
> |
>
> From: CGeffken@xxxxxxx
> Date: Tue, 19 Mar 2002 22:11:02 EST
> Subject: Re: IML: IMPS at Carslile All Chrysler
> Nationals 2002
> Reply-To: mailing-list@xxxxxxxxxxxxxxxx
>
> --part1_99.238f1d21.29c957c6_boundary
> Content-Type: text/plain; charset="US-ASCII"
> Content-Transfer-Encoding: 7bit
>
> Actually, you can stay outside Carlisle and take a
> short cut and bypass all
> the traffic. If I find the map, I'll post it.
>
> I typically stay in Harrisburg and I'm there in no
> time.
>
> Carl
>
>
>
> > The Comfort Inn is already booked up. I got a
> room at the Sleep Inn. You
> > want to get as close to the site as possible as
> the road through the area
> > from the outlying Motels is narrow as in not a
> four lane highway and
> > traffic
> > is SLOW and HORRENDOUS to the event. This is what
> I was told by a few
> > IMLers about a month ago.
> >
> > For what it's worth, Henry Hopkins/Richard
> Palmer--will be our first
> > Carlisle though we've been to Hershey once.
> >
>
>
> --part1_99.238f1d21.29c957c6_boundary
> Content-Type: text/html; charset="US-ASCII"
> Content-Transfer-Encoding: 7bit
>
=== message truncated ===
__________________________________________________
Do You Yahoo!?
Yahoo! Movies - coverage of the 74th Academy Awards®
http://movies.yahoo.com/
Back to the Home of the Forward Look Network