move the sticker/latch side to side. >From: Mark McDonald <tomswift@xxxxxxxxxxxxx> >Reply-To: mailing-list@xxxxxxxxxxxxxxxx >To: "mailing-list@xxxxxxxxxxxxxxxx" <mailing-list@xxxxxxxxxxxxxxxx> >Subject: IML: leaks & trunk adjustment >Date: Thu, 14 Mar 2002 13:51:11 -0600 > >My thanks to everyone who helped me with my leaking trunk problem, >particularly Phil who suggested the paper trick (not to say the other >ideas weren't good, but in my case I think this one worked out the >best). I checked the weatherstrip using a piece of paper and the seal >was weakest right above the area where the puddle forms. > >So now I've whacked the heack out of the flange in that area and it's >just a matter of waiting for the next big storm or building a scaffold >for my hose. > >In the meantime, can someone tell me if there is a lateral adjustment >for the trunk lid? in other words, to move it side to side in the down >position. I've noticed the gap between the lip & the fender is wider on >the side with the leak. But, so far, all I've been able to find is an >adjustment for the height of the trunk lid. The only other thing that >would effect the position are the hinges, but I see no way to move them. > _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com