3m plastic and emblem adhesive

["DR CHALLENGER" <drchallenger@xxxxxxxxxxx>]

HUH? I live in northern NY state and my emblems put on with it do not fall 
off.


>From: "Robert Dervin" <rjdervin@xxxxxxxxxxx>
>Reply-To: mailing-list@xxxxxxxxxxxxxxxx
>To: mailing-list@xxxxxxxxxxxxxxxx
>Subject: Re: IML: 3m plastic and emblem adhesive
>Date: Tue, 19 Feb 2002 11:51:51 +0000
>
>The 3M product is fine unless you live in a cold climate. It has a tendancy
>to contract in the cold and the emblems will fall off.
>
>
>>From: mopar2@xxxxxxxxxx
>>Reply-To: mailing-list@xxxxxxxxxxxxxxxx
>>To: mailing-list@xxxxxxxxxxxxxxxx
>>Subject: Re: IML: 3m plastic and emblem adhesive
>>Date: Mon, 18 Feb 2002 19:26:15 -0700
>>
>>This is a good product. I used it to mount those pesky eyebrow medallions
>>on my
>>60 & they've managed to stay on for the past 8 or 9 years.
>>John
>>
>>mike sutton wrote:
>>
>> > Hi all
>> >
>> > Im sure an epoxy would be fine for that application that was mentioned
>> > earlier, you may also want to consider the 3M brand product " Plastic
>>and
>> > Emblem Adhesive "...its clear and sets up fairly fast, but if you ever
>>want
>> > to remove the item later, this stuff has the advantage of letting you
>>take
>> > things back off NON DESTRUCTIVELY :)
>> >
>> > Mikey
>> > 62 Crown Coupe
>> >
>> > -----------------  http://www.imperialclub.com  -----------------
>> > This message was sent to you by the Imperial Mailing List. Please
>> > reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
>> > shared with everyone. Private messages (and attachments) for the
>> > Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
>> > To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>>
>>
>>