Mark
If I recall there are tabs that hold it onto the door panel. It's been a
while since I worked on one but I think you need to remove the door panel to
get it loose.
Whiteshoes
-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]On Behalf Of Mark McDonald
Sent: Monday, February 11, 2002 10:12 AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: 1968 power window switch
I suspect a problem in the power window switch on my driver's door in my
'68 convertible and I am having a devil of a time trying to remove the
plate that contains the switch.
I asked a friend who has a 68 and I've done everything he recommends--
I've removed the 3 retaining screws (and a 4th one way back
underneath)-- but the thing will NOT budge more than about 1/4" in any
direction. Has anyone on the list ever done this on a convertible? I'm
wondering if it's slightly different on the conv. than the 4 dr. Is
there something else holding this sucker down?
Mark M
Back to the Home of the Forward Look Network