IML: Electric Window Gears

["Tom Cox" <tdcox@xxxxxxxxxxxxx>]

Hey George,

I would think the first thing to do would be to see which gears are the same
between years. I have power window motors for 56's and 60/61's and can check
them; maybe someone in the club already knows. I am sure the Imperial Club
and the Chrysler 300 Club has a lot of folks that need the 55-65 gears and
then the Imperial Club would expand on into the 70's. 

Does anyone know the different sizes/teeth of gears that were made from
55-75?

Tom Cox


-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of
georgelaurie@xxxxxxxxxxx
Sent: Tuesday, May 07, 2002 2:53 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: Electric Window Repair

Sorry I have not seriously look at making them yet, but of course I would if

there was a market for them, so how many of you guys out there need them? 
George.
PS- it would be months before I had the time
----- Original Message ----- 
From: "Moorehouse Construction LLC" <smoorehouse@xxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Thursday, February 14, 2008 2:56 PM
Subject: Re: IML: Electric Window Repair


> Do you make tail light lenses for 66 imperials ? contact me off list at 
> smoorehouse@xxxxxxxxxxxxx
> ----- Original Message ----- 
> From: <georgelaurie@xxxxxxxxxxx>
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Sent: Tuesday, May 07, 2002 2:20 AM
> Subject: Re: IML: Electric Window Repair
>
>
>>I do make new cogs for the 1960 chrysler, maybe they are the same?  I make

>>them from machineable resin with a wire moulded inside for extra strength.

>>When I had my F years ago I remember the cogs broke in half. So if they 
>>are the same cog  ( 28 angled theeth and steps on the inner )  I do make 
>>them, regards George.
>> georgelaurie@xxxxxxxxxxx
>> ----- Original Message ----- 
>> From: "Ken Lang" <imperialken@xxxxxxxxx>
>> To: <mailing-list@xxxxxxxxxxxxxxxx>
>> Sent: Thursday, February 14, 2008 2:28 AM
>> Subject: IML: Electric Window Repair
>>
>>
>>> I'm usually pretty good about finding resources for parts and repair
>>> stuff, but today, I'm drawing a blank. (I'm sure it has a lot to do
>>> with age, mine not the Imperial's)
>>>
>>> The driver side electric window on my 67 Crown quick working recently.
>>> I was able to move the window up and down manually so I suspected the
>>> plastic gear in the motor housing was broken.  After taking it apart
>>> last night I discovered my suspicions were correct.
>>>
>>> I remembered seeing posts from other members regarding this topic in
>>> the past and the mention that repair kits were available at one of the
>>> major-chain parts houses like Kragen or Napa.  Well I unsuccessfully
>>> searched Kragen, RockAuto, PartsAmerica and Napa.  I got nothing.
>>> Then I searched the club web site looking for information regarding
>>> electric window repair and again I turned up nothing.  I'm sure the
>>> information is there, it's just a user-interface issue.  (me the user,
>>> not interfacing well with the computer)
>>>
>>> Does someone with a memory better than mine know where I can find that
>>> little plastic gear?
>>>
>>> Thanks
>>>
>>> Ken
>>> 67 Crown 4 Dr Ht
>>> 68 LeBaron 4 Dr Ht
>>>
>>> -----------------  http://www.imperialclub.com  -----------------
>>> This message was sent to you by the Imperial Mailing List. Please
>>> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
>>> shared with everyone. Private messages (and attachments) for the
>>> Administrators should be sent to iml.webmonster@xxxxxxxxx
>>> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>>>
>>>
>>
>>
>> -----------------  http://www.imperialclub.com  -----------------
>> This message was sent to you by the Imperial Mailing List. Please reply 
>> to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with 
>> everyone. Private messages (and attachments) for the
>> Administrators should be sent to iml.webmonster@xxxxxxxxx
>> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please reply to

> mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with 
> everyone. Private messages (and attachments) for the
> Administrators should be sent to iml.webmonster@xxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>
> 


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm