Re: IML: 60& 61 Heater Hose Clamp Photo
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: 60& 61 Heater Hose Clamp Photo



Rob,
Check out Penstar Reproductions at www.penstar.net for these clips. I bought one for my 300H some time ago. They also list the hose bracket that bolts to the front of the alternator.

Regards,
Mark Souders
Mohrsville, PA



-----Original Message-----
From: Rob Kidd <rlkidd@xxxxxxxxxxxxxxxx>
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Mon, 4 Feb 2008 11:06 am
Subject: Re: IML: 60& 61 Heater Hose Clamp Photo

On Sun, 03 Feb 2008 08:56:12 -0500
 "Rob Kidd" <rlkidd@xxxxxxxxxxxxxxxx> wrote:
>Yes, that must be that 'elusive' clamp! It appears to clip
>into the cutout hole in the fenderwell. Mine is a non A/C
>car so, I would have just the one hot side heater hose
>routed that way. I have looked in the parts manual and
>could not find a listing on it. I may have to try some of
>the Imperial parts guys to see if they would have one.
>Thank you for your help with this photo. Rob Kidd.
>
>
>On Sat, 2 Feb 2008 23:54:20 -0700
> "john sadowski" <jsadowski@xxxxxxx> wrote:
>>Here is a pic of the hose clamp on my 60's. One has air &
>>one doesn't.
>>John
>


[Image Removed]

More new features than ever. Check out the new AOL Mail!


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.