Re: IML: 59 413 engine color
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: 59 413 engine color



He is my potential father in law, and I think you are right, so I will listen to him and then follow your advice. Thanks, David ----- Original Message ----- From: "PAUL WENTINK" <randalpark@xxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Tuesday, January 22, 2008 9:03 AM
Subject: Re: IML: 59 413 engine color


You should probably replace or rebuild the pump, but this engine was
not short on oil pressure, so a higher pressure unit is not necessary.
The original pump was capable of more than what was required. Low oil
pressure in these cars is usually caused by worn rod bearings. The 413
was pretty much over built in all respects such as cooling,
lubrication, and longevity in general.

Who is advising you? Are they familiar with the specifications for this
engine? Some of the questions sound like they are coming from someone
who equates these engines to the quality of much older design, like an
old FOMOCO Lincoln Zephyr V-12.

Paul W.


-----Original Message-----
From: david carpenter <zirc@xxxxxxxxxxx>
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Tue, 22 Jan 2008 5:31 am
Subject: Re: IML: 59 413 engine color



We just using a standard harmonic balancer remover, of course leaving
the bolt in place and loosening the bolt as we

backed the balancer off. No problems. I just found out that my block
and heads are not cracked which was good news. My engine had water in
the oil and so far have not found the source or leak for the water. I
am wondering whether to have another machine shop test them again. I
would hate to completely rebuilding the engine only to discover that
there is still a small crack somewhere. Someone suggested that

I replace the oil pump with a higher pressure pump. Any thoughts on
that? Thanks, David


----- Original Message -----

From: Rob van der Es

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Tuesday, January 22, 2008 4:22 AM

Subject: Re: IML: 59 413 engine color




Hi David,



Presuming that the 59 is similair to a 60 engine (both are the RB
version) the main engine block is black.

The intake manifold is also black, the airfilter housing is gold, the
cruisecontrol housing (from Perfect Circle) is also black.

My waterpump was re-newed so it is shiny metal (alu-look), but I guess
it was originally black too.

The black on my engine is semi gloss.



I hope this helps you a little further in your rebuilding project.

Speaking about rebuilding, was it difficult to find all the necessary
parts?

Since this is a RB block one could expect some difficulties I think..



And, btw, do you have a good trick to remove that bolt that keeps the
harmonic balancer on the crankshaft?

I am in progress of replacing the timing chain of my engine, but are a
little afraid to start cause everyone told me that

this bolt is very hard to remove..

Especially with the engine in the car, ofcourse I don't want to remove
the engine for a relative "simple" job like replacing the timing chain!!



Robert


----- Original Message -----

From: david carpenter

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Tuesday, January 22, 2008 7:26 AM

Subject: IML: 59 413 engine color




I am rebuilding my 413 and wondering about color. I understand the main
engine block is black. Is the intake manifold black? I know the air
filter is gold What about the cruise control housing? Is the water pump
black? Was the black a gloss or semi gloss. Any help would be greatly
appreciated. This is a great website for imperial owners and I really
enjoy the quick feedback. Thank you, David Carpenter




________________________________________________________________________
More new features than ever.  Check out the new AOL Mail ! -
http://webmail.aol.com

-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.