RE: IML: Disc Brake conversion
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: Disc Brake conversion



Sometimes these conversion kits require larger than stock wheel diameter.  Check the kit specs and see if it mentions minimum wheel size for your specific kit.

 

Ken

67 Crown 4 Dr Ht

68 LeBaron 4 Dr Ht

 

From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of wardle65@xxxxxxxxxxxxxx
Sent: Thursday, November 22, 2007 10:14 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: Disc Brake conversion

 

I have just finished a disc brake conversion on my 58 with an AAJ kit however when I put my wheels on they wont spin.  The inside of the rim is hitting the calipers somewhere i think but I can't see where.  I have ground all the casting marks off the calipers smooth but I still have the problem.  Has any one struck this before if you have on of these kits fitted.

 

Regards

Chris

 

PS: I will call AAJ for a solution tomorrow but I thought I would try the IML to see if anyone has had the same problem.   

 

Regards

Chris Wardle

58 Imp Crown Coupe

 



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.