Re: IML: Oil usage theories
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: Oil usage theories
- From: "Daniel Richardson" <TheRichardsonFamily@xxxxxxxxxxx>
- Date: Tue, 13 Nov 2007 20:27:49 -0600
Steve, et al:
I do have some leaks but, the usage seems to be from driving, not leaking.
A few normally expected drips from a 40+ year old - not unusual.
As I am a bit nervous about hastening the demise of the bottom end, I think
I will just continue to add oil for now, maybe 20W50 in the Summer. She
really needs to be completely rebuilt, but then that drags the tranny in for
a needed overhaul too. See, you guys are great at spending my money, aren't
you! 3K engine + 1K trans, yuck!!
For now, I'm just driving her and having fun! New tires, wheels, and an
entire exhaust system, are gonna' get my next couple a G's. I'll let you
all know when she blows. (BTW, anyone have a '65 413 High Performance block
for sale?)
Thanks again, as always, for the advice from everyone. This is the absolute
best resource!
Dan Richardson
300L Family Heirloom
----- Original Message -----
From: "Steve B." <Imperial59@xxxxxxxxxxxxxxx>
Dan:
You probably do need valve seals as most engines do at this age, but I
don't think they are your problem. You've seen the Chrysler minivans
around town that look like mosquito foggers with all the blue smoke coming
out the back? Well they aren't using the kind of oil you are using...
Failed valve seals let the oil in to the combustion chamber, if you were
actually burning that much oil there would be clouds of oil behind you and
those plugs would have been black clumps of goo instead of nice and brown.
From your description of the plugs it doesn't sound like you are burning
much/any oil.
You most likely have a leak somewhere. Valve cover gaskets (wet oil on
the plug threads suggest they are leaking), oil pressure sending unit,
rear main seal... I don't know where it is but I don't think it is a
valve seal problem. Try putting some cardboard under the car and rev the
engine to hiway rpm for a few minutes and see if you can see anything
leaking.
Steve B.
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network