IML: Fw: fuel tank sending unit
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: Fw: fuel tank sending unit



 
----- Original Message -----
Sent: Friday, July 20, 2007 8:49 PM
Subject: IML: fuel tank sending unit

Thanks everyone for the advice on the convert. top it works.   I need some advice on on adjusting the fuel tank sender, I put a new (fabricated from brass by a guy in Detroit I think, several years ago,  the gauge always read empty, recently  I removed the dash and went thru cleaned, checked and repaired as  needed. the gauge still read empty, but as fuel was consumed the " check gages" light will come on showing that the low fuel warning part of the circuit is working. but the gauge always reads empty. today I removed the sending unit and bent the float rod "up", now with a full tank it reads 1/4  tank on the gauge. Did I bend too far or not far enough. BTW is not "gages"  an incorrect spelling on the dash. thamks, Mike Becker   67 imperial, in Salem, Oregon 


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.