Try looking up "CHROME PAINT" in google and then
hitting the IMAGES button at the top in their toolbar.
http://images.google.com/imagesum=1&tab=wi&hl=en&q=chrome%20paint
Seems that this would definitely be a trick that most
body shops could perform if needed. I'd probably
consider stripping the chrome plating off the part
first.
-Kenyon
--- tdcox <tdcox@xxxxxxxxxxxxx> wrote:
> In restoring my 56 Southampton coupe, I used a
> fellow that has a process
> that “paints” metal such that it appears as though
> it were chrome plated.
>
>
>
> The outer, rear window sills of the coupe were so
> badly pitted the chrome
> plater refused to plate them. The cost of casting
> new parts was prohibitive
> because of the compound angles, so I had them
> painted and no one ever knew
> until I told them. This fellow sands the parts,
> uses body filler to smooth
> the part, applies a special base coat, then a
> metalized paint and then a
> clear coat. Some of my parts came out with a
> “yellow” cast to them compared
> to the chrome and he is working to tone this down by
> using more blue in the
> process. Most folks didn’t notice the yellowing.
>
>
>
> This process is ideal for interior parts and the
> cost is between 40-60% of
> chrome plating. He did my inside door trim, the
> inside windshield trim, a
> C-pillar medallion and the gold front Imperial
> emblem as well as the window
> sills. He is setting up to do this full time and I
> would recommend him
> highly.
>
>
>
> His name is Don Pirre and he operates out of
> Pennsylvania. His email
> address is:
>
>
>
> HYPERLINK
> "mailto:don@xxxxxxxxxxxxxxxx"don@xxxxxxxxxxxxxxxx
>
>
>
> If you have questions, feel free to email me or
> contact him directly.
>
>
>
> Tom Cox
>
I cannot open up the link. Just send error 404 cannot find.
>
>
>
>
>
>
>
> _____
>
> From: mailing-list-owner@xxxxxxxxxxxxxxxx
> [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On
> Behalf Of Dick Benjamin
> Sent: Monday, July 17, 2006 11:11 AM
> To: mailing-list@xxxxxxxxxxxxxxxx
> Subject: RE: IML: Voltage limiter
>
>
>
> You can also replace the internal gauge regulator
> with a separate unit,
> mounted anywhere under the dash; but you have to do
> a little bit of
> re-wiring to install it. Kens’ suggestion is
> easier, if you have a good
> spare fuel gauge.
>
>
>
> NAPA sells a separate unit under part number IR9, as
> I recall – it is called
> an “instrument regulator” and is also known as a 5
> volt power supply or
> regulator.
>
>
>
> It is a simple three terminal device: 12 volts in,
> ground for the case, and
> 5 volts out – which goes to the fuel, oil and temp
> gauges. The ammeter does
> not require the 5 volts.
>
>
> Dick
>
>
>
> _____
>
> From: mailing-list-owner@xxxxxxxxxxxxxxxx
> [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On
> Behalf Of Ken Lang
> Sent: Sunday, July 16, 2006 9:10 PM
> To: mailing-list@xxxxxxxxxxxxxxxx
> Subject: RE: IML: Voltage limiter
>
>
>
> The voltage regulator for the gauges is cleverly
> hidden inside the fuel
> gauge. If you have the spare panel with a good fuel
> gauge, just swap it
> out.
>
>
>
> Someone had mentioned some time back about a place
> that restores these
> units. Unfortunately, it was one of the many posts
> that fell victim to the
> ‘delete’ key.
>
>
>
> Ken
>
> 67 Crown 4 Dr Ht
>
>
>
>
>
> _____
>
> From: mailing-list-owner@xxxxxxxxxxxxxxxx
> [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On
> Behalf Of DON SAVARD
> Sent: Sunday, July 16, 2006 8:18 PM
> To: imp
> Subject: IML: Voltage limiter
>
>
>
> Hi all,
>
> Working on my 1967 Sedan and the Fuel, Temp and Oil
> Gauges do not move off
> empty. The shop manual refers to a voltage limiter
> on the instrument panel
> as the likely culprit. I do not find one on my
> instrument panel or the spare
> I have. Anybody out there seen this critter and
> where would it be?
>
> Thank
>
> Don Savard
>
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.472 / Virus Database: 269.8.9/834 -
> Release Date: 6/5/2007 2:38
> PM
>
>
>
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.472 / Virus Database: 269.8.9/834 -
> Release Date: 6/5/2007 2:38
> PM
>
>
Kenyon Wills
____________________________________________________________________________________
Choose the right car based on your needs. Check out Yahoo! Autos new Car
Finder tool.
http://autos.yahoo.com/carfinder/
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network