I got mine for my 73 from NAPA on-line. Should be the same part number. Tim Durrer --- randalpark@xxxxxxx wrote: > The new external limiter fastens to the back of the > gauge cluster, and > will have to be wired in. The mounting point serves > as ground. The OIC > web site fully explains the process. When I did all > of my cars years > ago, I was able to use all of the existing wiring, > and simply by pass > the old connection to the failed limiter. The new > limiter has been said > to be available at NAPA. The part number should be > on the OIC web site. > Good luck. > > Paul W. > > -----Original Message----- > From: randalpark@xxxxxxx > To: mailing-list@xxxxxxxxxxxxxxxx > Sent: Wed, 9 May 2007 2:13 PM > Subject: Re: IML: 60 fuel sender unit > > That is because the voltage limiter has failed. > > Paul W. > > -----Original Message----- > From: shelbyguy@xxxxxxx > To: mailing-list@xxxxxxxxxxxxxxxx > Sent: Wed, 9 May 2007 12:53 PM > Subject: Re: IML: 60 fuel sender unit > > Thanks for all the responses. I unplugged the sender > and the fuel gauge > obviously reads E but the temp and oil pressure > still peg at the high > side > and...I don't know where I put my FSM > Tom > ----- Original Message ----- From: "Rob Kidd" > <rlkidd@xxxxxxxxxxxxxxxx> > > To: <mailing-list@xxxxxxxxxxxxxxxx> > Sent: Wednesday, May 09, 2007 4:28 PM > Subject: Re: IML: 60 fuel sender unit > > > Try unplugging the sender at the tank again. The > > rheostat may be bad in the new part. > > > > > > > > On Wed, 9 May 2007 12:10:52 -0700 (PDT) > > tom higgins <thomash85715@xxxxxxxxx> wrote: > >>Why would this happen at the same time as the > sender was > >>being changed out? Just a coincidence? Tom said > the > >>other gauges read normal until the replacement > device went > >>in. > >> > >>randalpark@xxxxxxx wrote: The internal voltage > limiter > >>has failed. You will need to bypass it and > >>install an external one on the back of the > cluster. By > >>being pegged the > >>gauges are receiving too much voltage, so they > will burn > >>out very soon > >>if you don't disconnect them. > >> > >>There is information about this at ther OIC web > site. > >> > >>Paul W. > >> > >>-----Original Message----- > >>From: shelbyguy@xxxxxxx > >>To: mailing-list@xxxxxxxxxxxxxxxx > >>Sent: Wed, 9 May 2007 10:46 AM > >>Subject: Re: IML: 60 fuel sender unit > >> > >>Well, I got my rebuilt fuel sender for my 60 Crown > back > >>last night and > >>I just got finished installing it. Prior to the > rebuild, > >>my fuel gauge > >>remained on E at all times. The oil pressure gauge > worked > >>as did the > >>temperature and ammeter gauges. Now, after > installing the > >>rebuilt fuel > >>sender, the fuel gauge registers FULL even though > I know > >>there is only > >>3 gallons in the tank, the temp gauge pegged at H > as did > >>the oil > >>pressure gauge. Anybody have any ideas what > happened? > >>Thanx > >>Tom > >>60 4dr Crown Southampton. > >>----------------- http://www.imperialclub.com > >>----------------- >>This message was sent to you > by the Imperial > Mailing List. > >>Please reply > >>to mailing-list@xxxxxxxxxxxxxxxx and your response > will be > >>shared with > >>everyone. Private messages (and attachments) for > the > >>Administrators should be sent to > >>webmaster@xxxxxxxxxxxxxxxx > >>To UN-SUBSCRIBE, go to > >>http://imperialclub.com/unsubscribe.htm > >> > >> > >> > >>_______________________________________________________________________ > > _ > >>AOL now offers free email to everyone. Find out > more about > >>what's free > >>from AOL at AOL.com. > >>=0 > >> > >> > >>----------------- http://www.imperialclub.com > >>----------------- > >>This message was sent to you by the Imperial > Mailing List. > >>Please > >>reply to mailing-list@xxxxxxxxxxxxxxxx and your > response > >>will be > >>shared with everyone. Private messages (and > attachments) > >>for the > >>Administrators should be sent to > >>webmaster@xxxxxxxxxxxxxxxx > >>To UN-SUBSCRIBE, go to > >>http://imperialclub.com/unsubscribe.htm > >> > >> > >> > >> > >>--------------------------------- > >>Bored stiff? Loosen up... > >>Download and play hundreds of games for free on > Yahoo! > >>Games. > > > > > > > > ----------------- http://www.imperialclub.com > ----------------- > > This message was sent to you by the Imperial > Mailing List. Please > > reply to mailing-list@xxxxxxxxxxxxxxxx and your > response will be > > shared with everyone. Private messages (and > attachments) for the > > Administrators should be sent to > webmaster@xxxxxxxxxxxxxxxx > > To UN-SUBSCRIBE, go to > http://imperialclub.com/unsubscribe.htm > ----------------- http://www.imperialclub.com > ----------------- > This message was sent to you by the Imperial Mailing > List. Please reply > to mailing-list@xxxxxxxxxxxxxxxx and your response > will be shared with > everyone. Private messages (and attachments) for the > Administrators should be sent to > webmaster@xxxxxxxxxxxxxxxx > To UN-SUBSCRIBE, go to > http://imperialclub.com/unsubscribe.htm > > > ________________________________________________________________________ > > > AOL now offers free email to everyone. Find out more > about what's free > from AOL at AOL.com. > =0 > > ----------------- http://www.imperialclub.com > ----------------- > This message was sent to you by the Imperial Mailing > List. Please reply > to mailing-list@xxxxxxxxxxxxxxxx and your response > will be shared with > everyone. Private messages (and attachments) for the > Administrators should be sent to > webmaster@xxxxxxxxxxxxxxxx > === message truncated === ____________________________________________________________________________________ Don't get soaked. Take a quick peak at the forecast with the Yahoo! Search weather shortcut. http://tools.search.yahoo.com/shortcuts/#loc_weather ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm