Paul W. -----Original Message----- From: YBSHORE@xxxxxxx To: mailing-list@xxxxxxxxxxxxxxxx Sent: Thu, 3 May 2007 4:45 PM Subject: Re: IML: 1956 Horn Ring//2In a message dated 5/3/2007 8:05:25 P.M. Eastern Daylight Time, randalpark@xxxxxxx writes:
All 1955 and 1956 Chryslers and Imperials have the same horn ring. Imperialists,I found the right welder can fix these rings and the fix is far better than any epoxy combination you will EVER find......my local welder in fact just fixed my '55 ring and there is so much 'meat' on the ring and cross member, even ground for welding and sanded to dipping capability, it would easily pass as driver quality...and does!!! The dip shall come next season....
ybshore -------- See what's free at AOL.com. ________________________________________________________________________AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com.
=0 ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm