Re: IML: Removal of front seat
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: Removal of front seat
- From: David Dimitriou <macedonxx@xxxxxxxxx>
- Date: Mon, 30 Apr 2007 12:11:16 -0700 (PDT)
Tip number 1. It's heavy, get a friend. I took the back off while the seat was still in the car. Just the bottom itself is still pretty heavy. More awkward than heavy, but heavy nonetheless.
Tip number 2. There are 4 studs that go through the floor and have nuts on the underside of the car. They are very rust prone. Spray WD-40 or Liquid Wrench on them, otherwise they may shear on you.
Tip number 3. Don't forget to disconnect the power seat wire.
Good luck, have fun.
Dave
Tim <tpattrin@xxxxxxxxx> wrote: I have a '63 Imperial and I'm having new original interior put in. I
need to take out the front seat. Has anyone done this and are there
any tips I should know.
-Tim
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial
Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network