Re: IML: door panel removal

Tom gave a good rundown, I would just add that you can also use a plastic or metal putty knife, maybe with a 2 inch or 50mm wide blade, and just take your time and work around the door. Make sure the putty knife is right up against the clips before you carefully pry the clips loose.

The door handle requires a small hex head/allen wrench, maybe about 1/8 inch. The allen screw is on the back part of the handle (if I remember correctly) and is down about 3 or 4 inches from the top of the armrest. Turn it counter-clockwise to loosen. With a bright light positioned just above the armrest you should be able to see the allen head screw.

On 4/10/07, kenneth chilton <finfan@xxxxxxxxxxxxx> wrote:

hello america
i have to remove the rear door penel on our 57 cr ht , could any one
describe to me in clear insructions how to tackle this procedure , the
workshop manual does not seem to show it for the imp, and i dont want to
damage any thing by doing ir wrong

kind regards
ken in the UK

_________________________________________________________________
Get Hotmail, News, Sport and Entertainment from MSN on your mobile.
http://www.msn.txt4content.com/

----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm