There is a mystery short in the steering column..Jerry -- the tilt/telescopic column doesn't have any wiring going from the key switch through the column. There is a metal rod that runs from the key switch to the actual ignition switch that is mounted about half way down the column.At first it was 2 black wires from the wide black blade connector at the bottom of the column that needed wiggled to make it start, now it happens when the you tilt the column..or any other wires in the harness from the key to the blade connector...anyone else have this problem...BTW the ignition switch is a year old.. AND the wire from the bulkhead to the small white connector has been replaced