Re: IML: Seatbelts needed for 61
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Seatbelts needed for 61



Jim...can you send those seat belt pictures to me also?
Thanx
Tom
shelbyguy@xxxxxxx
----- Original Message -----
Sent: Wednesday, February 14, 2007 5:35 PM
Subject: Re: IML: Seatbelts needed for 61

I have the buckles out of my '60 in the basement, and I saw them just the other day.  I can take a picture of it, but I'll need your e-mail address to send you the picture.  And I just realized you own a '61, so forget all that stuff I posted about a 1962.  Our cars are the same where it counts.
Sorry about that.
 
Jim L. in OR
----- Original Message -----
Sent: Wednesday, February 14, 2007 12:39 PM
Subject: RE: IML: Seatbelts needed for 61

   So what do the buckles look like ? Just the generic aircraft style that was described
                                                                                                                       Frank

Donn Reese <DReese@xxxxxxxx> wrote:
I got belts for my '60 from Bob H. (http://www.imperialclub.org/Part/Yards/index.htm) - other salvage yards might have them also.  I think the buckles interchange from at least 1960 thru 1962, check the part numbers.  The belt fabric I got from Bob cleaned up nicely and is fine for a daily driver.
 
I've installed the rear belts but haven't tackled getting the fronts located in the car yet.
 
Donn Reese
1960 Custom 4dr hdtp
 
-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]On Behalf Of Frank Griffin
Sent: Wednesday, February 14, 2007 8:25 AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: Seatbelts needed for 61

     My 61 never came with seatbelts. I would really like to find an original set. I imagine a 62 or 63 parts car could have the correct buckles.
                                                                     Frank



* * * * * * * * * * * * * * * * * * * * * * * * * * * * *
This electronic communication (including all attachments) is intended only for the named addressee(s) and may contain confidential information. It has not passed through our standard review process. Design data and recommendations included herein are provided as a matter of convenience and should not be used for final design. RELY ONLY ON THE FINAL HARDCOPY MATERIALS BEARING THE CONSULTANT'S ORIGINAL SIGNATURE AND SEAL. If you are not the named addressee(s), any use, dissemination, distribution or copying of this communication is prohibited. If you have received this communication in error, please notify the sender immediately by return e-mail and delete the original communication from your system.
This e-mail and all other electronic (including voice) communications from the sender's firm are not intended by the sender to constitute an electronic record, an electronic signature or any agreement to conduct a transaction by electronic means. Any such intention or agreement is hereby expressly disclaimed unless otherwise specifically indicated.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * *





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.