Brad On Feb 12, 2007, at 9:42 PM, aeyn wrote:
Have you tried to get rubber cover gaskets? I purchased some in 1980 for my 1972 Custom Suburban S/W with a 400 in it. I am going to see if I can get some for my 75's 440. RockAuto has them FEL-PRO Part # VS50145R Rubber coated fiber gaskets $14.40 Æyn & Patrick --- Brad Weikert <a292@xxxxxxx> wrote:On Feb 12, 2007, at 6:30 PM, Kenyon Wills wrote:Aside from a valve cover that refuses to seal despite four tries...If you haven't tried it already you might want to try a Fel-Pro blue stripe cork gasket and install it with NO sealant. That's how I finally stopped the valve covers from leaking on my '73 440. As the oil soaks into the cork the cork will expand and (hopefully) seal the leaks. Brad----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm