Re: IML: 1962 Power Vent Window Conversion
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: 1962 Power Vent Window Conversion



Ah ha...ok I guess I do need the power vent windows too. Well at least the bases anyway.

Dave
1962 Crown 4 Door (x2)

randalpark@xxxxxxx wrote:
The manual vent windows have the "knuckle buster" latches. Aren't they
quite permanently fastened to the base of the window frame?

Paul W.

-----Original Message-----
From: macedonxx@xxxxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Mon, 12 Feb 2007 7:35 AM
Subject: IML: 1962 Power Vent Window Conversion

I'm upgrading to power vents on my '62. I've obtained the motors and
switches. Can I convert my manual ones over or do I need to get the
power vent windows too? I see there is a large pin at the base. Is it
different on the power vent window? Say with perhaps a slot for the
drive from the motor?

thanks,
Dave
1962 Crown 4 Door (x2)
________________________________________________________________________
Check out the new AOL. Most comprehensive set of free safety and
security tools, free access to millions of high-quality videos from
across the web, free AOL Mail and more.


----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.