RE: IML: Ammeter Gauge Failure for '66 LeBaron

["Hall, Marc F" <marc.f.hall@xxxxxxxxxx>]

I had my ammeter fail on my '66 Crown Coupe, the car would not run.  I
seem to remember that the entire electrical system was out, except for
the interior lights.  It has been over 14 years since that happened, so
I can't be sure.  

Bypassed ammeter was the fix by McCuthens Auto Electric in Everett, Tom
M. is an old hand at all things electrical in classic cars. 

Marc in Mukilteo


787 Service Ready Leader 
Customer Support Program Management 
Commercial Aviation Services 
425-294-4309 phone 
206-409-4853 Mobile 


-----Original Message-----
From: randalpark@xxxxxxx [mailto:randalpark@xxxxxxx] 
Sent: Saturday, February 10, 2007 5:52 AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: Ammeter Gauge for '66 LeBaron

I have heard of Ammeter Gauge failure causing the car not to run. This
has never happened to me, but I don't think it would be an intermittent
problem. Is this problem still intermittent, or has the car finally quit
running altogether? There should be a way to bypass that gauge to
determine if it really is your problem. Replacing the gauge isn't going
to hurt anything, but I don't think it would be my next step.

Intermittent ignition problems are nearly always due to loose/dirty
connections, or corroded wires.

Paul W.

-----Original Message-----
From: dansgarage@xxxxxxxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Fri, 9 Feb 2007 9:30 PM
Subject: Re: IML: Ammeter Gauge for '66 LeBaron

Hi All...will the IML member who replied to my request about getting a
replacment AMMETER GAUGE please email me again
(dansgarage@xxxxxxxxxxxx) as I
think I accidentally deleted your message. I would like to buy the gauge
you mentioned so please also let me know the best way to pay you for
that gauge.
Thanks again!!
Dan Melnik


---- dansgarage@xxxxxxxxxxxx wrote:

=============
Hi All....if anyone has a Ammeter Gauge for my '66 LeBaron please
contact me directly (dansgaragae@xxxxxxxxxxxx) as I think mine may have
gotten toasted or at least'bent' during this problem I had the past few
days.
Thanks a bunch for all your help!!!!
If you know of anyone who may have a gauge for sale please let me
know..!
Dan Melnik




----------------- http://www.imperialclub.com ----------------- This
message was sent to you by the Imperial Mailing List. Please reply to
mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with
everyone. Private messages (and attachments) for the Administrators
should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to
http://imperialclub.com/unsubscribe.htm




----------------- http://www.imperialclub.com ----------------- This
message was sent to you by the Imperial Mailing List. Please reply to
mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with
everyone. Private messages (and attachments) for the Administrators
should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to
http://imperialclub.com/unsubscribe.htm
________________________________________________________________________
Check out the new AOL.  Most comprehensive set of free safety and
security tools, free access to millions of high-quality videos from
across the web, free AOL Mail and more.


-----------------  http://www.imperialclub.com  ----------------- This
message was sent to you by the Imperial Mailing List. Please reply to
mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with
everyone. Private messages (and attachments) for the Administrators
should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to
http://imperialclub.com/unsubscribe.htm



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm