Re: IML: 56 Ignition Problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: 56 Ignition Problem
- From: Brad Weikert <a292@xxxxxxx>
- Date: Wed, 7 Feb 2007 21:47:15 -0700
Well I certainly hope that fixes it for you. Strange that the coil
would be fried, a bad condenser should not damage the coil. A good
coil will act like it's bad if the condenser is not working but will
work fine again once the condenser is replaced.
Have a good evening
Brad
On Feb 7, 2007, at 9:09 PM, Jeff Cantor wrote:
Brad,
Your explanation made very good sense! As a mechanical engineer, I
always forget to use the water analogy when dealing with electricity.
Now I think can feel pretty safe in saying that my problem is probably
the condenser (and the now fried coil).
Jeff
56 Sedan
Trenton, NJ
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network