IML: rear end parts replaced

["Chris Strohmeyer" <chrisstroh@xxxxxxxxxxx>]

Note to Admin: This is my last question on my rear end!

Thx Sherman,

Ok. It's been 10k miles since the rebuild(and 10 years ago). Here's what
they replaced:
ONE                HM89443 Bearing
ONE.                         7216 Seal
TWO.                      25590 Bearing
TWO                       25520 Bearing
ONE.              HM803149 Bearing
ONE.              HM89410 Bearing
ONE                HM803110 Bearing
TWO shims and a couple oil seals and ONE 4318060 Oil additive to the GL5
gear oil.
Is there a break-in period after the rebuild therefore the oil should be
changed right afterwards?
I will try changing the oil with a heavier one AND the limited slip additive 
and let you know if the noise goes away.

Chris
67 Imperial Convertible




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm