Re: IML: Edelbrock carb change
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: Edelbrock carb change
- From: "Steve B." <Imperial59@xxxxxxxxxxxxxxx>
- Date: Sun, 14 Jan 2007 11:56:13 -0500
The formula shows that a 440 turning at 5k rpm with 90% volumetric
efficiency (a big stretch) needs 573cfm.
I put an Edelbrock 750 on my '59 413 and personally was not happy with
the results. The low end just felt to doggy for me and I ended up
e-baying the edelbrock and putting my original back on again.
Steve B.
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network