Re: IML: bleeding disks

["Frederick Joslin" <fljoslin@xxxxxxxx>]

I do not know that you should not have the engine running when bleeding the brakes other than for a safety issue.

Whe you apply power brakes you are changing the vacuum to the engine so it is reasonable for the engine to run a little differently.

----- Original Message -----
From: "Steve B."
To: mailing-list@xxxxxxxxxxxxxxxx, chrisstroh@xxxxxxxxxxx
Subject: Re: IML: bleeding disks
Date: Sat, 06 Jan 2007 13:37:00 -0500


I'm bleeding my disks on my 67. With the
engine running, the pedal of course goes to the
floor until we start the bleeding process.
When I push the pedal to the floor, there is a
slight change in how the car runs. Does this
automatically mean that the booster is bad?
Should the engine have absolutely NO change
when the brakes are applied? Is it bad to bleed
the brakes while the engine is running?(I'm
taking advantage of the power brakes to pump
them).


Chris:
The car is not supposed to be running when
you bleed the brakes. The change in engine
idle would be expected if you were trying to
bleed with the engine running.

Steve B.


----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial
Mailing List. Please reply to
mailing-list@xxxxxxxxxxxxxxxx and your response
will be shared with everyone. Private messages
(and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm

Fred Joslin