Jerry, is there any chance the t-stat is installed up-side down? your radiator would really have to be junk, if it is that blocked.Water pump failures, are usually a leak, from the seal. The impeller would have to fall off, not to pump.I've seen new defective t-stats, take it out, as a test and see if you have water flow then. Dave.
-------------- Original message --------------
From: jhplc@xxxxxxxxxxx
Thanks listers for your answers..
I think it could be the water pump, as after the motor heats up, I still
can't feel water running through the upper hose..(it's easy to squeeze the
hose), the lower hose is new and not collapsed.. and the 2 heater hoses running to the servo have no water in them .(the servo is stuck on "cold", no hot air in car, fan on 1 speed, but that's
another story).. and one of them got hot enough to melt the black plastic
alternator connector wire housing slightly...I will also check the radiator. too...
Jerry
HOT 73
Back to the Home of the Forward Look Network