Re: IML: cleaning the block
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: cleaning the block



As crazy as that idea sounds, I've heard it from other sources as well (you know who you are!). I'm going to clean what I can out of the freeze plugs, then put an in-line filter on, and use the soap idea. Thanks everyone.

Dan Richardson
300L Family Heirloom


----- Original Message ----- From: <mopar413@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Wednesday, November 29, 2006 10:19 PM
Subject: IML: cleaning the block


If you are going to by pass the radiator and heatere core, I would consider runing some Tide soap thu the system. Works really good. It loosens up the crud and can be flused out leaving the bolck super clean.


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.