|
Richard,
What is in the spring kit?
Much of my '66 hardware is shot, like the broken eyelet on
a movable flange (sorry, I do not know the correct term for that part?) for one
end of the spring!
2 door coupe doors are really heavy, I have rarely
seen a 2 door model with good springs if it has mileage on the car. I bet
it is the same hardware for the front doors of a 4 door model, so not really
well designed for the heavier doors of the 2 door models.
Regards,
Marc in Mukilteo
'66 Crown Coupe
'67 300 Vert
787 Service Ready Leader
Customer Support Program Management
Commercial Aviation Services
425-294-4309 phone
206-409-4853 Mobile
Thanks Tom, I did call
him and he does have the kits.
From:
mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]
On Behalf Of Tom Scott
Sent: Monday, October 30, 2006 1:12
PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: door spring kit for my
'66
I've always had good luck calling
Lowell. If
he isn't there, he gets back to you very
quickly.
----- Original Message -----
Sent: Monday,
October 30, 2006 11:52 AM
Subject: RE: IML:
door spring kit for my '66
Elijah,
I tried to
email Lowell
with the address you provided it but it won't go though. Any
suggestions?
Rich
W.
"Woolf,Richard T(Contractor)"
<richard.woolf@xxxxxxxxxxxx> wrote:
I remember reading on the Imperial
Web Site Club that somebody makes a spring kit for the driver's door. The door
spring makes a terrible popping noise when opening and closing the door.
Does anybody on the list know anything about these spring kits
for my '66?
I believe Lowell Howe has these
available:
http://www.imperialclub.com/Part/Yards/LowellHowe.htm
Good
luck,
Elijah
Check
out the New Yahoo! Mail - Fire up a more powerful email and get things
done faster.
|
