RE: IML: 1980's Transmission question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: IML: 1980's Transmission question
- From: "Rob P" <fristpenny@xxxxxxxxxxx>
- Date: Thu, 20 Jul 2006 09:00:27 -0400
Do the converter in the 80's cars have a drain plug? I'm pretty sure my '82
does not, but I'm not 100 % sure. I think they stopped putting them at some
time, and wouldn't want anybody going crazy looking for one. Of course my
FSM isn't here.
Also, Uncle Rodger and Aunt Gabby, is the filter in the line an aftermarket
one you put? If so, what company, etc did you use?
Rob
Pleas drain and change the fluid in both the transmission pan and the
torque
convertor. There is a plug on the front area of the torque convertor that
is
seen after you remove the lower protective cover that faces to the front.
I have two filters on my '63. One is in the pan and one is part of the
line
to the front cooler.
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network