Re: IML: steering wheel (rim blow) resto

[John Corey <jcorey@xxxxxxxxxxx>]

WD-40.  Spray and soak.
jc

On May 31, 2006, at 7:47 AM, Frank Winnips wrote:

> Hi group,
>
> I want to repair my cracked steering wheel but I have a problem  
> with removing the rim blow switch.
> The rubber of the switch has turned rock solid and is almost  
> impossible to remove from the groove.
> Is there a product to make the rubber soft again so I can get it  
> out easily?
>
> Frank
> '72 coupe (sure brake)
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please  
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be  
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm

John Corey
jcorey@xxxxxxxxxx,jcorey@xxxxxxxxxxx
CFIC-Qdrive, 302 Tenth St., Troy, NY 12180 USA
518-272-3565
fax: -272-3582




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm