IML: Speedo cable bushing
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: Speedo cable bushing



I removed the lower speedo cable in my '67 for lubrication. In the process I lost a small bushing that was located at the autopilot end of the cable at the base of the cable core as it contacts the housing that bolts to the autopilot. Not sure how to replace it because I'm not sure what material it was made of. I think it was there to reduce friction as the cable spins against the housing.

Any ideas?

Scott
'67 Crown 4dht




----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.