You did not state what year but if the brake fluid level is ok in the master cylinder then the likely cause is a bad M/C leaking by the internal seals. The booster can not by itself cause no pedal but may exacerbate the problem in the M/C because of the added input pressure. Ernie and The Black Bitc_!! -----Original Message----- From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of tommie joseph Sent: Monday, April 10, 2006 7:13 PM To: mailing-list@xxxxxxxxxxxxxxxx Subject: IML: master brake+brake booster to anyone, i had my brake done last year all new parts, cylinders, lines, shoes,master cylinder. but today the brake peddle after starting the car up hits the floor (no brakes) can anyone help me on what i shound look for , i have no leaks, cound it be the master clyinder if so were can i get a kit for it, or is it the booster, can i get a kit for the booster. thanks tom __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm