Yes, I have a loose switch. As I posted yesterday, when I get down to my shop, I'll dig it out and look for a number stamped on it. Probably tomorrow I can do it. Don't pull your steering wheel just for that! Dick Benjamin >>>>-----Original Message-----From jsadowski Sent: Thursday, March 09, 2006 6:21 PM Jim, I guess I'll have to pull the steering wheel to see if it has that. Does anyone happen to have a switch already out of a 67-69 with tilt that could verify if it has the 3 digit stamp? John ----- Original Message ----- From: "Jim Carpenter" <Jim@xxxxxxxxxxxxxxxxxxxxxxxx> To: <jsadowski@xxxxxxx> Sent: Thursday, March 09, 2006 6:41 PM Subject: [Fwd: Re: IML: 67-69 turn signal switches for tilt wheel cars, #2880 271 (Was: Turn Signal Switch 69)] > John, will you be able to see if there are three digits stamped on the old > switch? > Jim ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm