Re: IML: How many rotors do we need
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: How many rotors do we need



I would buy two rotors for '68.
 
Thanks!
 
Paul W. 
 
-----Original Message-----
From: Ken Lang <ken@xxxxxxxxxxxxx>
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Wed, 22 Feb 2006 20:51:45 -0800
Subject: RE: IML: How many rotors do we need

I don?t know how accurate this count is, but I just compiled it looking through the emails from the past week.  My count shows a total of 16 rotors so far.  They are:
 
Ken Lang - 4 rotors
Fredrick Joslin - 2 rotors
Michael Mann - 2 rotors
Mark Jefferson - 4 rotors
Randy Shustack - 2 rotors
K. Eric Wolfe - 2 rotors
 
There might be more that I didn?t catch.
 
We also need to find out from Shaun if there is a minimum number needed for him to tool-up for the run.
 
I?m hoping someone will take the lead on this.  I would volunteer but my time in front of the computer is limited due to work and it would be unfair to make everyone wait several days to get a response from me.
 
Ken
?67 Crown 4 drht
 
 

From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of Frederick Joslin
Sent: Wednesday, February 22, 2006 7:00 PM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: How many rotors do we need
 
I would consider two Budd rotors for my 1969 LeBaron if the price was reasonable. 
I paid $150 each for rotors for a 1972 Fury conversion onto a 1966 Chrysler. I thought that this was a little much considering that they were a "stock" item, but paid it anyway.   
----- Original Message -----
From: GeoNort@xxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: How many rotors do we need
Date: Wed, 22 Feb 2006 15:12:20 EST


Has anyone tabulated how many disc rotors we need for  67 thru 69 Imperials? We may have a source here if we pool our requirements.
 
New Subscriber(s): Shaun
> Email Address is: shaun@xxxxxxxxxxxxx
> Member Location: Mountain View, CA
>
> Car(s) owned: None
>
> Self-Introduction: A member of your group said that many of your members are looking for a brake rotor for 1967-1969 (Budd Brake System) Imperial that no one makes anymore. We are a brake manufacturer that specializes in making custom and smaller quantities of rotors and brake drums. We would like to offer our services to the group at the request of William Herbert
 
Fred Joslin
 


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.