I think that you are looking at the main terminal. Usually trouble with only one window isn't related to that part of the car. If you can make the window motor work with a jumper wire, then I still think that you have a wiring problem, or possibly a bad window switch. The window switch can be rebuilt if you are handy with tools. Paul W. In an email dated Sun, 13 11 2005 10:09:31 am GMT, Frye55Imperial@xxxxxxx writes: >Hi Paul W. , Thanks for at least answering about the '55. ?If I'm wrong, I >apologize too, but the wires all go to what looks like a relay switch to me, >some from the front of the car and some from the window motor to the relay, maybe >it's not called a relay, but it sure looks like one to me. ?I used to have a >'64 Lincoln convertible and it was full of relay switches in order for the top >to work correctly and that's what this switch looks like to me, there's one >for each window and the motor works fine if I jump it from the other side! ?SO, >is that what I'm looking for or what???? ?Thanks again, help, David Frye > ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm