Rare Parts is the only resource on the planet known unless you find a NOS or used one. The design is apparently faulty and prone to wear, so going with a used one may put you back where you started after some use. I spent 3 months looking for other avenues to go down, as they are $250 or so, but that's about it. Good news is that you can get it done. Likely will require sending your old one in, so find a place where your car can sit for the duration of the time that they take to redo your part. You can find their contact info on the website under PARTS. -Kenyon --- stancub@xxxxxxx wrote: > I am in need of an idler arm assembly to align my > car. Does anyone have any idea where this may be > obtained? > Thanks...Mike > Kenyon Wills ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm