IML: Dual master seeks Brake Proportioning Valve
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: Dual master seeks Brake Proportioning Valve




I am doing a single to dual master switch while I am doing the disk conversion and was told that I must get a Brake Proportioning Valve that is for a disk front/drum rear. Well, I am having trouble. Autoparts stores dont have it. So what am I to do???
Summit has them, but are they what I need or is this some race only kind of thing? Here is what summit has to say about theirs.  
"A turn of the knob adjusts between 100 and 1,000 psi, and can reduce pressure by up to 57 percent."
Thanks,
Charles Major

_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.