Re: IML: Spun Bearing - in block cure?

From: Longramx2@xxxxxxxxxxxxx
Date: Sat, 6 Aug 2005 18:54:32 EDT

I used to race at over 7000 rpm, and if I could get away with polishing it and zipping it back together, you should be able to do the same. however if you are a perfectionist and have plenty of time and money, then go the route others have suggested. again as long as there is'nt any damage to the crank thats gonna be abrasive to the new bearing you'll be fine for many many more miles.

Prev by Date: RE: IML: Spun Bearing - in block cure?
Next by Date: Re: IML: 1973 Brake - Metering valve appears to be it.
Previous by thread: Re: IML: Spun Bearing - in block cure?
Next by thread: Re: IML: 1973 Brake - Metering valve appears to be it.
Index(es):
- Date
- Thread

Back to the Home of the Forward Look Network

Copyright © The Forward Look Network. All rights reserved.
Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.