Re: IML: Autotemp II needed

[Jøran "slayer" Vordal <slayerking88@xxxxxxxxxxx>]

Hi Chris!

Do you know wich Merchedes model used/using this aluminium servo? Since I 
live in Europe, it's a good chance for me to find a used one I hope. After 
all, the Merchedes is a very popular car here in Norway. You'll find one in 
"every" streetcorner. It's (i'm afraid) one of the most sold cars over here.

> From Joeran Vordal, Norway.

> From: "Chris Boekhout" <charger69@xxxxxxxxxxxxxx>
> Reply-To: mailing-list@xxxxxxxxxxxxxxxx
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Subject: Re: IML: Autotemp II needed
> Date: Wed, 27 Jul 2005 22:52:48 -0500
>
> I found an aluminum bodied servo on a Mercedes-Benz in the local 
> junkyard-cost? $15. I bench tested it and the motor worked, put it on the 
> car and, well  there must be other issues, I think my amplifier is fried. 
> I'll probably send the servo and the amplifier off to that place in Tenn. 
> and have them checked out/rebuilt. I've got other fish to fry at the 
> moment, so the Imperial sits comfortably in the garage, waiting for it's 
> day in the sunshine.
>
> Chris
> 72 Lebaron
> 71 Lebaron
>
> ----- Original Message ----- From: "Jøran "slayer" Vordal" 
> <slayerking88@xxxxxxxxxxx>
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Sent: Wednesday, July 27, 2005 6:30 AM
> Subject: Re: IML: Autotemp II needed
>
>
> > My experience of this item, is that if their old and the car is not been 
> > used for a long time, the inside dries out, and when you start using the 
> > car again, the heat and pressure causes the "black box" to crack. I've 
> > tried special glue, but it didn't work very long before it cracked again. 
> > I have now bought a used one about a year ago, but it to starting to leak 
> > now. I'm think i'm going for the new one in aluminium, but I don't know 
> > where to find them. Maybe somone on the list may help me with that?
> >
> > > From Joeran Vordal, Norway ('72 Imp).
> >
> > > From: "Robert Weldon" <robert.weldon@xxxxxxxxx>
> > > Reply-To: mailing-list@xxxxxxxxxxxxxxxx
> > > To: <mailing-list@xxxxxxxxxxxxxxxx>
> > > Subject: Re: IML: Autotemp II needed
> > > Date: Tue, 26 Jul 2005 22:12:21 -0600
> > >
> > > Yup, looks like a black plastic mushroom with a bunch of pneumatic holes 
> > > coming out the rear of it.  Just a thought, would  pouring a layer of 
> > > super glue or something similar in the base serve to seal up the crack? 
> > > Has anyone tried this.
> > > ----- Original Message ----- From: "Jøran "slayer" Vordal" 
> > > <slayerking88@xxxxxxxxxxx>
> > > To: <mailing-list@xxxxxxxxxxxxxxxx>
> > > Sent: Tuesday, July 26, 2005 4:52 AM
> > > Subject: RE: IML: Autotemp II needed
> > >
> > >
> > > > Hi Robert!
> > > >
> > > > Are we talking about the unit on the passenger side, besides the engine? 
> > > > With 4 water hoses going into it?
> > > >
> > > > > From Joeran Vordal, Norway ('72 Imp 2 door).
> > > >
> > > > > From: "Robert Weldon" <robert.weldon@xxxxxxxxx>
> > > > > Reply-To: mailing-list@xxxxxxxxxxxxxxxx
> > > > > To: <mailing-list@xxxxxxxxxxxxxxxx>
> > > > > Subject: IML: Autotemp II needed
> > > > > Date: Mon, 25 Jul 2005 23:07:46 -0600
> > > > >
> > > > > My autotemp II unit blew up, for a 72 Imp.  I thought I would take a 
> > > > > stab at finding a good (ie functional) used one here.  I know about the 
> > > > > Mercedes metal ones, I would be interested in a used one of those also. 
> > > > > I can't afford the new one, however.  Anyone?
> > > >
> > > >
> > > >
> > > >
> > > > -----------------  http://www.imperialclub.com  -----------------
> > > > This message was sent to you by the Imperial Mailing List. Please reply 
> > > > to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with 
> > > > everyone. Private messages (and attachments) for the
> > > > Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> > > > To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
> > >
> > >
> > >
> > >
> > > -----------------  http://www.imperialclub.com  -----------------
> > > This message was sent to you by the Imperial Mailing List. Please reply 
> > > to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with 
> > > everyone. Private messages (and attachments) for the
> > > Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> > > To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
> >
> >
> >
> >
> > -----------------  http://www.imperialclub.com  -----------------
> > This message was sent to you by the Imperial Mailing List. Please reply to 
> > mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with 
> > everyone. Private messages (and attachments) for the
> > Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> > To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please reply to 
> mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with 
> everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm