Clay, When you adjust the radio volume normally,
is there a static like crackling noise as you move the volume control? If
so it just means the volume potentiometer (pot) is dirty. A good blast of
contact cleaner will usually clear this up. The problem is getting the
contact cleaner into the pot. After removing the knobs from the shaft you
might be successful spraying along the edge of the shaft and hopefully get enough
into the pot to clear up the problem. Otherwise you will need to remove
the radio to gain better access to clean it. Ken 67 Crown Imperial 69 Satellite 63 Power Wagon 01 01 300 M 04 Ram 2500 From:
mailing-list-owner@xxxxxxxxxxxxxxxx
[mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On
Behalf Of imperialman Greetings everyone. My 60 Custom's otherwise great sounding radio has developed
a problem. Every so often the volume will start to
fade on its own until I reach up and touch the on-off volume knob. Then the volume will most always come back to
normal . Sometimes I have to do this three or four times before
the volume will stay . Could it be an antenna problem? Its hard to listen to Minnesota Twins baseball in
glorious AM with fluctuating volume!
Clay Smith
|