Re: IML: 63 carb PCV hose?

["CHRISTINE & CHRISTOPHER" <cchmaness@xxxxxxxxxxxxx>]

O.K. I went out to my car and looked at where the PVC valve goes. It
connects to the carb directly between the two adjuster screws in the center
front of the carb.  I hope this helps

Chris M.
63 Custom 2 dr.
----- Original Message -----
From: "DR CHALLENGER" <drchallenger@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Wednesday, May 11, 2005 10:51 AM
Subject: Re: IML: 63 carb PCV hose?


> the first year i find a listing for a pcv value is 1966
>
> >From: RandalPark@xxxxxxx
> >>
> >1963 does have a PCV Valve from the factory. Just like other years, it is
> >planted in the rear of the right (passenger's side) valve cover. The hose
> >goes to a vacuum port in front at the base of the carburator. I don't
> >remember if this port is actually from the bottom of the carb, or the
> >spacer, but it is definitely there. I think that the vacuum hose is 3/8".
> >
> >Paul W.
> >
>
>
>
>
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm